Wedding DJ hours planner

How Many DJ Hours Does Your Wedding Need?

Pick the kind of day, set when guests arrive and slide each part of it longer or shorter. The hours, the clock times and the timeline drawing change as you go. Then send the plan with your quote request.

Start from a day

For a 4 PM ceremony, guests usually start arriving around 3:30 PM.

Slide to zero when the ceremony happens somewhere else, such as a church.

Who plays arrival and ceremony music

From the grand entrance to the last song, 1 to 8 hours.

6DJ hours

Music ends at 9:30 PM, after 6 hours of DJ and MC time from 3:30 PM.

Planning estimate
Your day as a timelineGuest arrival, ceremony, cocktail hour and reception, 3:30 PM to 9:30 PM.

Each block is one part of the day, drawn to scale with its start time under it. Hatched blocks marked "not DJ" are music someone else plays. The flag is the last song; a dashed line marks midnight.

Music starts
3:30 PM
Music ends
9:30 PM
Longest block
Reception, 4 h
Past midnight
No

Your DJ Hours Plan

Email it

A planning estimate, not a quote or a final schedule. Your coordinator, your venue and your DJ set the real run of show. Your inputs stay on this page.

How the Planner Counts Your Wedding DJ Hours

The count is a plain sum. Start with the guest arrival window, add the ceremony, add the cocktail hour, add the reception. Then take out any part of the day where someone other than our DJ is in charge of the music. What is left is the stretch of the day when our DJ and MC are playing, talking on the microphone and running cues, which is the number most couples mean when they ask how many hours to book.

Clock times come from the arrival time you pick. Each block starts the minute the one before it ends, so the planner assumes the cocktail hour begins as soon as the recessional finishes and the reception starts when cocktails close. Real days have small gaps; your coordinator usually tucks those inside the blocks rather than adding time between them.

Inside the reception, the planner splits the time into five parts so you can see how much dancing is left: the grand entrance and first dance, dinner with toasts, parent dances and the cake, open dancing, and a last song with the send off. Those splits follow common published planning guides, not a rule of ours. Dinner service in particular moves a lot between a plated meal and a buffet, so treat the dancing figure as a guide and adjust it with your coordinator.

The comparison line measures your total against the plan we quote most often for a wedding with everything at one venue: one hour from guest arrival through the ceremony, one hour of cocktail music and four hours of reception DJ and MC work, six hours in all. If your total comes out longer, that is fine. We are happy to keep playing; the planner simply shows it so the extra time is part of the plan from the start.

A Worked Example With Real Numbers

Say guests start arriving at 5:30 PM for a 6:00 PM ceremony that runs 15 minutes. Our DJ plays the ceremony. Cocktails last one hour, and the couple wants a five hour reception because the family dances.

  • Arrival window: 30 minutes, 5:30 PM to 6:00 PM.
  • Ceremony: 15 minutes, 6:00 PM to 6:15 PM.
  • Cocktail hour: 60 minutes, 6:15 PM to 7:15 PM.
  • Reception: 300 minutes, 7:15 PM to 12:15 AM.

Add 30, 15, 60 and 300 and you get 405 minutes, or 6 hours 45 minutes of DJ time, which is 45 minutes past our six hour standard. The planner also flags that the night crosses midnight. That one flag is the most useful thing on the screen for this couple: if the venue wants music off at midnight, the reception has to start earlier or run shorter, and it is far easier to fix now than at 11:45 PM.

Now switch the ceremony music to a string trio. The first 45 minutes drop out of the count, DJ time becomes 6 hours from 6:15 PM, and the drawing shows the arrival and ceremony as hatched blocks marked not DJ. Someone still has to plan a microphone for the officiant, so tell us who is playing and we will sort out who covers the vows.

Read Your Timeline Block by Block

The timeline drawing and the plan card are the parts to share. Each block shows its start time, what happens and whether it is DJ time. A few things to look for before you send it:

  • The arrival window. Prelude music starts when the first guests take their seats, not when the ceremony starts. If you expect guests early, widen the window.
  • The gap between the recessional and the entrance. That is your cocktail hour, and it is also when photos happen and the reception room gets its final touches. A short cocktail hour squeezes all three.
  • The dancing figure. If it reads under an hour, the reception is mostly dinner and formal moments. Some couples want exactly that; others are surprised.
  • The last song. Compare that clock time with your venue contract before anything else.

What the Planner Leaves Out

A planner that only adds minutes cannot see your venue. These are the things it does not count, and each one can change the hours you book or the crew we send:

  • Load in, setup, sound check and strike. They happen before your first guest and after your last song. How a DJ counts that time varies, so ask; we confirm crew arrival with your venue and write it down.
  • A ceremony in a different place. If guests walk from a garden to a ballroom, music has to be ready in both spots on time, which can mean a second, smaller sound setup. The planner counts minutes, not locations.
  • Travel between two venues. A church ceremony and a reception across town leave a gap the planner does not model.
  • Music cutoffs and venue rules. Many venues set a time for music off and a later time for vendors out. Those come from your contract, so check them against the last row of your timeline.
  • Delays on the day. Photos run over and dinner comes out late. The planner shows a clean schedule; build in slack with your coordinator.
  • Prices. The planner never shows one. Hours are only one of the things that move a quote, along with lighting, live performers, a request for a specific DJ, add ons and the venue itself.

When to Call Us Instead of Trusting the Count

Some weddings do not fit a few sliders. Call us at (305) 714-0402 or send the form below when your day includes any of these:

  • A ceremony and a reception at two different venues, or a long break between them.
  • A hora loca, a cultural dance set or live entertainers in the middle of the party. Our hora loca and live entertainers page shows what that adds to the night.
  • Announcements in English and Spanish. DJ Homer, DJ ROBCANO, DJ Jose and DJ GIO all work bilingual rooms; see why that matters in our guide to bilingual wedding DJs in Miami.
  • A reception that you already know will run past midnight, or a venue with an early music cutoff.
  • Lighting, uplighting or a light show you want running for the whole night as well as the music.

The planner gives you a number; our guide to how long to book a wedding DJ and what those hours cover explains why each block matters and what a four hour booking drops. Before you sign with anyone, run through our questions to ask before booking a wedding DJ.

Questions

Wedding DJ Hours Questions We Hear Most

How many hours of DJ time do most weddings book?

When the ceremony, cocktails and reception all happen at one venue, we plan six hours: one for guest arrival and the ceremony, one for cocktails and four for the reception. Planning guides we read put reception only bookings around four to five hours and full day coverage around six to eight.

How many hours of dancing does a four hour reception leave?

Usually a little under two. The entrance, dinner, toasts, parent dances and the cake take the first two hours or so. Move the reception slider in the planner and watch the open dancing block change.

What time should the music start for a 4 PM ceremony?

About 3:30 PM, when the first guests sit down. Prelude music covers that half hour, then the processional starts the ceremony. If your venue seats guests earlier, widen the arrival window.

Does setup time count in the hours the planner shows?

No. The planner counts music time only. Load in, setup and the sound check happen before guests arrive, and the strike after the last song. Ask any DJ how they count that time; we confirm our crew's arrival with your venue.

How long is a cocktail hour at a wedding?

Most run an hour, which is why it is the default here. Shorter works when photos are done before the ceremony; longer helps when guests move between buildings. Slide the cocktail hour to zero if the reception starts right after the ceremony.

What if our reception runs past midnight?

The planner flags it and marks midnight on the timeline. Check your venue's music cutoff and vendor out time first, then tell us when you book so the extra hours and crew schedule are planned.

Can we book less than six hours?

Tell us your timeline and we will quote what fits it. A shorter plan can make sense when another musician plays the ceremony or cocktails happen without music.

How far ahead should we book a wedding DJ?

As soon as you have a date and a venue, since Saturdays in peak season go first. After booking, your music questionnaire is due two weeks before the wedding, followed by a call with your DJ.

Is the planner's answer a quote?

No. It is a planning estimate for your own timeline. Send it with the form below and we reply with the hours we would plan and a quote built on your venue and your day.

Wedding DJ Quote

Send Us the Plan You Just Built

Press "Add this plan to my quote" above and your timeline lands in the message box. Add your date and venue, and we come back with the hours we would plan and a quote.

Phones answered daily, 9:30 AM to 8:30 PM.

Request a Wedding DJ Quote

Five fields are required. The rest helps us quote faster.

A venue name helps most. We check its rules before we quote.

What do you need? (pick any)

Rather talk? Call (305) 714-0402

Call Now Get a Quote